Happy Solstice.

Just had a small fire in the firepit at sunset, a little shot of Sambuca, hummed The Body Electric under my breath, lit some expired boat flares with my grandson and came in for dinner.

My wife and I ordered about two grand in boat stuff this week for our big refit project.  Materials to finish the cabin interior overhead and a furnace to heat the inside of the boat. 

Friday is supposed to be very windy.  I worry about the boat falling over in the driveway.  The ground is firm, and the stands are new but the boat is high up on stacked blocks because of the keel project, and I don't want to lower it until that is done.  It won't be done until the weather warms up enough for epoxy to cure. 




Happy New Year

My two resolutions are:

1.  Get Everything Done!

2.  Blog more often. 

Comments

Post a Comment

Popular posts from this blog

Rainy cold weekends are always a setback. 60 hour workweeks don't leave much time for catch-up.

Image
All this was accomplished on Memorial Day Weekend. After a failed attempt to hire members of the local highschool football team to move this thing, I broke out the gear, and slowly inched this over to the saw horses waiting near the fence.  A come-a-long, an A-frame ladder, and some timbers made slick with soapy water made for a slow but easy move.   Once along side the saw horses, My Grandson and I were able to lift and pivot the mast the rest of the way. Next was the construction of what will be my lead keel bulb foundry. Leveled and ready for the mold media.  I am thinking of using sand mixed with Mop and Glo to stabilize it.  A platform at the far end will hold the lead on a heat proof surface, slanted to run into the mold. This next weekend was too crappy to do anything outside.   We did start ripping the seams of the old dodger, in an effort to make patterns for a new dodger.  Also, we bought a hot knife to cut the Sunbrella fabric.  I ...
Read more

19 February 2023, Some Progress and a Flashback

Image
After the recent installation of the bevel adapter for the new furnace flue.  I had to reinstall the plastic grab rails.  Unfortunately, one of the mounting holes was now covered by the bevel adapter, so I had to split the grabrail into two pieces, and reshape it.  I think it came out OK... I am bedding everything with Butyl Rubber, and the recent sleet storm tested it with no leaks found.  while working on Via Mente in my front yard, it is so cold, and the times it is warm enough to do anything outside are few and far between.... I spend a lot of time reminiscing.... Here was a fun day. November of 2016 Sailing back from Marco Island to St James City.
Read more